Contrifugal machine
- Decanter (continuous horizontal centrifuge)
- Basket type
- In addition, (multiplex disks)
It deals with the maintenance of each home and abroad maker.
A domestic maker: IHI, Tomoe Engineering, Tanabe, Tsukishima Kikai
An overseas maker: Alfa Laval, GEA Westfalia, ANDRITZ/Humboldt, Flottweg
[the repair results]
Horizontal continuous centrifuge (decanter)
 |
| Characteristic |
Decanter centriguges are used in separation of the solid-liquid or solid-liquid-liquid suspensions.
The machine is consist of a solid cylindrical bowl rotating at high speed, a scroll rotating in the same axis with a slightly different speed, gear box adjusting the speed difference and body which carries all the rotating elements.
The product is fed along the centre line to a fixed distribution room within the bowl and then accelerated into the bowl by centrifugal force through the feeding point.
This centrifugal force then causes the suspended solids(the cake) to settle and accumulate at the bowl wall.
The cake is discharged by scroll from the conical part meanwhile clarified solid and water or only liquid flows back along the bowl and is discharged through the cylindrical end of the bowl by plates which can adjust the level of liquid. |
| Carry it out during maintenance by all means |
- On-site desorption work, trial run adjustment
- Fit part measurement, examination for PT
- Consumption parts exchange
- Dynamic balance and makes modifications
- Gear – box maintenance
- Assembling core soup stock adjustment
|
| Use |
- Drainage processing, grime processing
- Coal-tar refuse separation
Food, pharmaceutical products, chemicals, process of petrochemical products |
| Annual results number |
(To fit various manufacturers) approximately 60-70 |
|
Guinard type continuation centrifuge (product made in IHI)
The photograph is in condition to have taken off a casing. |
| Characteristic |
A slurry is supplied by the machine upper part. The liquid in a slurry catches the centrifugal force, and high speed passes a slit of turning screen and is divided into the outside. On the other hand, the solid particle is exhausted inside of screen to the lower part of the machine by the remainder, the scraper in the body of rotation. |
| Carry it out during maintenance by all means |
- On-site desorption work, trial run adjustment
- Fit part measurement
- Motion balances and makes modifications
|
| Use |
Food, pharmaceutical products, chemicals, process of petrochemical products |
| Annual results number |
Approximately 5-6 |
|
Escher (product made in Tsukishima Kikai)
 |
| Characteristic |
It supplies a slurry from the outside and the liquid catches the centrifugal force and can pull a slit of the screen and leads to the outside. The solid particle is pushed a little by consecutive extruded systems by the oil pressure and exhausts it from front. |
| Carry it out during maintenance by all means |
- On-site desorption work, trial run adjustment
- Fit part measurement
- Motion balances and makes modifications
- Assembling core soup stock adjustment
- Piston maintenance
|
| Use |
Process pharmaceutical, chemical, petrochemical products |
| Annual results number |
Approximately 2-3 |
|
Disk type centrifuge
 |
| Characteristic |
Separate solid content in a liquid continually, and it is an automatic discharge disk type centrifuge to exhaust discrete solid content with timer setting automatically. You can use it for the field of most for the purpose of liquid clearness, concentration of the solid content, the extraction of the active ingredient from solid content, the classification of solid content varying in the particle. |
| Carry it out during maintenance by all means |
- On-site desorption work, trial run adjustment
- Fit part measurement
- Motion balances and makes modifications
- Assembling core soup stock adjustment
|
| Use |
Process food, pharmaceutical, chemical, petrochemical products |
| Annual results number |
Approximately 2-3 |
|
※Please refer for other any questions.
